DiGiCo D-TuBe - World's First Integrated Digital Tube Mic Preamp
The recent Pro Light and Sound show in Frankfurt saw DiGiCo launch an exciting new product to be known as the D-TuBe. It’s the world’s first integrated remote digital tube mic preamp module, designed to fit neatly into existing DiGiCo systems to provide valve preamp sound characteristics not normally available in a digital mixing console.
Valve/tube technology has long been considered an elegant means of reproducing music. Until now, the large dimensions of the traditional 19-inch rack mount valve/tube pre amps have been a consideration, especially in the touring market where space is often at a premium. “I would not say tubes sound better but they do colour the sound of a vocal or a particular instrument and make it sound different,” says DiGiCo’s James Gordon. “This is something that sound engineers like to experiment with, so they insert them into their systems to provide characteristics they can’t otherwise get from either analogue or digital mixing consoles.” The new DiGiCo D-TuBe presents a unique alternative to this traditional technology by making it part of a digital console.
The D-TuBe was developed in conjunction with TL Audio and supplies no less than eight channels of tube pre amp. It has been designed to fit neatly into existing DiGiCo systems by simply replacing the last input module on a stage rack and moving the output module along one. This keeps the full compliment of 56 inputs to the stage rack, with the last eight inputs now being TuBes.
“We’ve found that when engineers use our consoles they tend to use little or no outboard, as there is so much integrated and recalled within our system,” says Gordon. “However, the common denominator that was always cropping up was the desire for the inclusion of a few channels of valve/tube technology to enhance and colour specific instruments or vocals. We’re always keen to react to what the market wants, so the D-TuBe is a logical addition to our product line adding just the right amount of colour to the mix.”
As the D-TuBe is able to slot into the Stage DiGiRACK, it has the shortest cable length between the mic and pre amp possible, giving exceptional signal-to-noise ratio. It has the same facilities as its solid-state counterpart, including analogue and digital gain controls with gain tracking. As the analogue gain is inserted before the D-TuBe it also acts as a drive control, and with digital gain after the D-TuBe a wide variation of colouration - or DiGistortion as DiGiCo likes to call it - is possible. And, as is standard on all DiGiCo products, these settings can be saved as part of the consoles snapshots and sessions.
“The D-TuBe isn’t a software version of a valve/tube amp,” concludes Gordon. “Because of the way these products work, we felt that the only genuine way to do this was the traditional way. The D-TuBe has all the interaction with the console that the standard mic input card has, but with four stereo tubes. What more could you want?”
More details about the DiGiCo D-TuBe will be available in the products section of the GT web site soon.
Filter Home Page